Trail & Timber™ WallLock Duo — Wall-Mount Buttstock Boot + Barrel Clip (Screw-On)
What:
A two-point wall/blind holder—buttstock boot + barrel clip—that parks your shotgun upright, steady, and clean.
When:
Use in blinds, sheds, garages, or the gear room when you want a fixed, hands-free spot while you call, swap shells, or gear up.
Why:
Keeps firearms controlled and off the floor. The finish-safe barrel clip prevents scuffs; the drain-through boot sheds mud and water.
Highlights
-
Two-point support for secure, upright staging
-
Flat-back plates; two #8 screws per piece (not included)
-
Smooth, non-marring 12/20-ga barrel clip
-
Drain-through buttstock boot base
-
Tough ABS in Black or Tan
How it works (install in minutes)
-
Place the buttstock boot at about hip height on a stud or solid panel; mark holes.
-
Place the barrel clip above it (typical spacing 18–24 in; adjust to your firearm).
-
Drill pilots if needed and fasten each plate with #8 wood screws (1–1.5").
-
Rest unloaded firearm: butt in boot, barrel in clip. Done.
In the box
-
WallLock Buttstock Boot — ABS (Black/Tan) ×1
-
WallLock Barrel Clip — ABS (Black/Tan) ×1
-
Mounting screws not included (use #8 × 1–1.5" into studs or rated anchors)
Specs
-
Mount: Flat-back plates; two #8 screws per piece
-
Compatibility: 12/20-ga shotgun barrels; fits common rifle stocks in the boot
-
Material/Finish: ABS, matte texture — Black / Tan
Safety
For unloaded firearms only. Not a locking or security device.
Variants
-
Color: Black / Tan